Exterior Paints
Galva-Guard Exterior Metal Enamels

Type
Soya-alkyd

Coverage
Approximately 500 sq.ft./gallon, depending on the condition of the surface

Application
This product may be applied by brush, roller or spray

Reduction
Brush and Roller - None
Spray - 8 to 1 with V-18 Paint & Enamel Thinner

Dry time
Tack free - 4 hours
Recoat - 18 hours

Cleanup
Use Mineral Spirits

Warning!
Removing existing paint from surfaces by means of sanding, scraping, or other mechanical means may create dust or particles containing lead. Avoid creating dust or other debris. BREATHING OR EATING LEAD-CONTAINING DUST OR DEBRIS CAN CAUSE HEALTH PROBLEMS, ESPECIALLY FOR CHILDREN AND PREGNANT WOMEN.

Special properties
Galva-Guard Enamels are formulated to provide maximum gloss retention and weather resistance while providing extremely good durability.

Where to use
Galva-Guard Enamels are specially formulated for use on exterior surfaces, especially metal roofs and buildings. It is also good on wood trim and lawn furniture. These finishes are equally at home for both residential and commercial/industrial maintenance uses.

Surface preparation
Surfaces to be painted must be clean, smooth and free of dirt, dust, mildew, grease, flaking and chipping paint, and other surface contamination. Cracks, seams, holes and nail holes should be filled with putty or caulking compound and allowed to dry. Slick or glossy surfaces should be dulled by sanding. All bare wood, metal and other surfaces should be coated with an appropriate primer before applying Galva-Guard.

Application
Apply only when the air temperature and that of the surface to be painted are above 45 degrees F. For best results, do not apply in direct sunlight. Avoid painting late in the day when dew or condensation are likely to form or when rain is threatening. Stir thoroughly before using.

Colors available
No. 907 Green
No. 908 Rich Red

Package sizes
Gallons and quarts

Primers
Exterior Paints
Interior Paints
Wood Finishes
Specialty Coatings

Back to Products page