Wood Finishes
Van-O-Var Quick Drying Interior Varnishes

Type
Vinyl toluene

Coverage
Approximately 500 sq.ft./gallon, depending on the condition of the surface.

Application
This product may be applied by brush or spray

Reduction
Brush - None
Spray - 4 to 1 with VM & P Naphtha

Dry time
Handle - 30 Minutes
Topcoat - 2 Hours

Cleanup
Use Mineral Spirits

Warning!
Removing existing paint from surfaces by means of sanding, scraping, or other mechanical means may create dust or particles containing lead. Avoid creating dust or other debris. BREATHING OR EATING LEAD-CONTAINING DUST OR DEBRIS CAN CAUSE HEALTH PROBLEMS, ESPECIALLY FOR CHILDREN AND PREGNANT WOMEN.

Special properties
Vanguard's Van-O-Var Quick Drying Varnishes are specially formulated to provide resistance to water, alcohol, acid and alkaline materials. In addition, they provide a superior topcoat over stains and fillers.

Where to use
Van-O-Var Varnishes are ideal for coating cabinets, woodwork, paneling, and fine furniture.

Surface preparation
Surface preparation is a key factor in proper finishing. The surface must be clean, dry, and free of dirt, grease, and mildew. Fill holes and cracks with paste wood filler. Bare wood should be sealed with V-671 Sanding Sealer first.

Application
Apply only when the air temperature and that of the surface to be stained are above 50 degrees F. Stir thoroughly before using. Apply a full even coat by brush or spray. Sand lightly between coats with fine sandpaper.

Colors available
V-41 Gloss Van-O-Var
V-42 Satin Van-O-Var

Package sizes
Gallons, quarts, and pints

Primers
Exterior Paints
Interior Paints
Wood Finishes
Specialty Coatings

Back to Products page