Wood Finishes
V-671 Fast Dry Varnish Sanding Sealer

Type
Alkyd

Coverage
Approximately 400 sq.ft./gallon, depending on the condition of the surface.

Application
This product may be applied by brush or spray

Reduction
Brush - None
Spray - None

Dry time
Handle - 15 Minutes
Topcoat - 2 Hours

Cleanup
Use Mineral Spirits

Warning!
Removing existing paint from surfaces by means of sanding, scraping, or other mechanical means may create dust or particles containing lead. Avoid creating dust or other debris. BREATHING OR EATING LEAD-CONTAINING DUST OR DEBRIS CAN CAUSE HEALTH PROBLEMS, ESPECIALLY FOR CHILDREN AND PREGNANT WOMEN.

Special properties
Easy sanding V-671 Fast Dry Varnish Sanding Sealer is specifically formulated to provide moisture resistance and excellent hold-out for subsequent coats of varnish. It may be tinted slightly with all-purpose tinting colors.

Where to use
V-671 Sanding Sealer is ideal for all interior wood surfaces. It is not recommended for use outdoors or under lacquer or polyurethane finishes.

Surface preparation
Surface preparation is a key factor in proper finishing. The surface must be clean, dry, and free of dirt, grease, and mildew. Fill holes and cracks with paste wood filler.

Application
Apply only when the air temperature and that of the surface to be stained are above 50 degrees F. Stir thoroughly before using. Apply a full even coat by brush or spray. Sand lightly between coats with fine sandpaper.

Colors available
V-671 Sanding Sealer

Package sizes
Gallons and quarts

Primers
Exterior Paints
Interior Paints
Wood Finishes
Specialty Coatings

Back to Products page