Wood Finishes
Hi-Build Clear Spraying

Type
Nitrocellulose - Rule 66

Coverage
Approximately 400 sq.ft./gallon, depending on the condition of the surface.

Application
These products are designed to be applied by spray

Reduction
Spray - None recommended. If you choose to thin, use L-5 Lacquer Thinner

Dry time
Sand - 30 Minutes
Topcoat - 2 Hours

Cleanup
Use L-5 Lacquer Thinner

Warning!
Removing existing paint from surfaces by means of sanding, scraping, or other mechanical means may create dust or particles containing lead. Avoid creating dust or other debris. BREATHING OR EATING LEAD-CONTAINING DUST OR DEBRIS CAN CAUSE HEALTH PROBLEMS, ESPECIALLY FOR CHILDREN AND PREGNANT WOMEN.

Special properties
HI-BUILD Spraying Lacquers are formulated for use by the experienced finisher. They provide god moisture and abrasion resistance.

Where to use
These high quality furniture type finishes are designed for use on interior wood surfaces, bare, filled or stained.

Surface preparation
Surface preparation is a key factor in proper finishing. The surface must be clean, dry, and free of dirt, grease, and mildew. Fill holes and cracks with paste wood filler. Stain wood if desired and allow to thoroughly dry before applying HI-BUILD Spraying Lacquer.

Application
Apply only when the air temperature and that of the surface to be sprayed are above 50 degrees F. Stir thoroughly before using. Apply a full, even coat. Sand lightly between coats with fine sandpaper.

Colors available
L-1131a Flat Spraying Lacquer
L-1179 Satin Spraying Lacquer
L-1193 Gloss Spraying Lacquer

Package sizes
Gallons only

Primers
Exterior Paints
Interior Paints
Wood Finishes
Specialty Coatings

Back to Products page