Interior Paints
Liquid Pearl Coating Acrylic Latex
Interior Enamel

Type
Acrylic latex

Coverage
Approximately 450 sq.ft./gallon depending on condition of the surface

Application
This product may be applied by brush, roller or spray

Reduction
Brush and Roller - none
Spray - Reduce with water no more than 2 pint per gallon

Dry time
Handle - 1 hour
Recoat - 2 hours

Cleanup
Use warm, soapy water

Warning!
Removing existing paint from surfaces by means of sanding, scraping, or other mechanical means may create dust or particles containing lead. Avoid creating dust or other debris. BREATHING OR EATING LEAD-CONTAINING DUST OR DEBRIS CAN CAUSE HEALTH PROBLEMS, ESPECIALLY FOR CHILDREN AND PREGNANT WOMEN.

Special properties
Liquid Pearl Coating is a superior acrylic latex enamel scientifically formulated to produce an eggshell or low lustre, decorative, protective coating. It is specifically formulated to provide maximum washability and performance on interior surfaces.

Where to use
Liquid Pearl Coating is recommended for interior walls, woodwork and masonry surfaces, either new or previously painted.

Surface preparation
Surfaces to be painted must be clean, smooth and free from dirt, mildew, grease, flaking and chipping paint, wax, wallpaper paste, and sizing. Cracks, seams and holes should be filled with a quality patching or spackling compound, allowed to dry, sanded and spot primed. Slick or glossy surfaces should be dulled by sanding. All bare wood, metal and other surfaces should be coated with an appropriate primer before applying Liquid Pearl Coating.

Application
Apply only when the air temperature and that of the surface to be painted are above 45 degrees F. Stir thoroughly before using.

Colors available
No. 1100 White
No. 1179 Pastel tint base
No. 1180 Medium tint base
No. 1181 Deep tint base
No. 1182 Ultra deep tint base

Package sizes
Gallons and quarts

Primers
Exterior Paints
Interior Paints
Wood Finishes
Specialty Coatings

Back to Products page