Interior Paints
Dekor Ceiling White Flat Latex

Type
PVA latex

Coverage
Approximately 450 sq.ft./gallon depending on condition of the surface

Application
This product may be applied by brush, roller or spray

Reduction
Brush and Roller - none
Spray - Reduce with water no more than 2 pint per gallon

Dry time
Handle - 1 hour
Recoat - 2 hours

Cleanup
Use warm, soapy water

Warning!
Removing existing paint from surfaces by means of sanding, scraping, or other mechanical means may create dust or particles containing lead. Avoid creating dust or other debris. BREATHING OR EATING LEAD-CONTAINING DUST OR DEBRIS CAN CAUSE HEALTH PROBLEMS, ESPECIALLY FOR CHILDREN AND PREGNANT WOMEN.

Special properties
Dekor is Vanguard's lowest cost flat latex ceiling and wall paint. An excellent value, it has excellent application properties, hiding power and dries in an hour with no unpleasant odor.

Where to use
Dekor is recommended for interior walls, woodwork and masonry surfaces, either new or previously painted. Due to its low cost, Dekor is especially well suited for areas requiring frequent repainting such as schools, offices, and stores.

Surface preparation
Surfaces to be painted must be clean, smooth and free from dirt, mildew, grease, flaking and chipping paint, wax, wallpaper paste, and sizing. Cracks, seams and holes should be filled with a quality patching or spackling compound, allowed to dry, sanded and spot primed. Slick or glossy surfaces should be dulled by sanding. All bare wood, metal and other surfaces should be coated with an appropriate primer before applying Dekor.

Application
Apply only when the air temperature and that of the surface to be painted are above 45 degrees F. Stir thoroughly before using.

Colors available
No. 773 Ceiling White

Package sizes
Gallons only

Primers
Exterior Paints
Interior Paints
Wood Finishes
Specialty Coatings

Back to Products page