Interior Paints
White Van-O-Flat Enamel

Type
Alkyd

Coverage
Approximately 400-500 sq.ft./gallon, depending on the condition of the surface

Application
This product may be applied by brush, roller or spray

Reduction
Brush and Roller - None
Spray - 4 to 1 with V-100 Spray Thinner

Dry time
Tack free - 2 hours
Recoat - 18 hours

Cleanup
Use Mineral Spirits

Warning!
Removing existing paint from surfaces by means of sanding, scraping, or other mechanical means may create dust or particles containing lead. Avoid creating dust or other debris. BREATHING OR EATING LEAD-CONTAINING DUST OR DEBRIS CAN CAUSE HEALTH PROBLEMS, ESPECIALLY FOR CHILDREN AND PREGNANT WOMEN.

Special properties
Van-O-Flat is a superior quality alkyd flat enamel for use on interior walls and woodwork. This product has excellent moisture and scrub resistance.

Where to use
Van-O-Flat is specially formulated for use on interior walls and woodwork where a flat sheen is desired. It is equally at home for both residential and commercial/industrial maintenance uses.

Surface preparation
Surfaces to be painted must be clean, smooth and free of dirt, dust, mildew, grease, flaking and chipping paint, and other surface contamination. Cracks, seams, holes and nail holes should be filled with putty or caulking compound and allowed to dry. Slick or glossy surfaces should be dulled by sanding. All bare wood, metal and other surfaces should be coated with an appropriate primer before applying Van-O-Flat.

Application
Apply only when the air temperature and that of the surface to be painted are above 45 degrees F. Stir thoroughly before using.

Colors available
No. 0-300 White

Package sizes
Gallons only

Primers
Exterior Paints
Interior Paints
Wood Finishes
Specialty Coatings

Back to Products page