Primers
P-5900 Red Oxide Primer

Type
Alkyd red oxide zinc chromate

Coverage
Approx. 450-525 sq.ft./gallon @ 1 mil dry film, depending on condition of the surface

Application
Conventional air spray or airless spray

Reduction
Conventional air - 4 to 1 with VM&P Naphtha
Airless spray - 8 to 1 with VM&P Naphtha

Dry time
Handle - 30 minutes
Recoat - 4 hours

Cleanup
Use Mineral Spirits or Xylene

Warning!
Removing existing paint from surfaces by means of sanding, scraping, or other mechanical means may create dust or particles containing lead. Avoid creating dust or other debris. BREATHING OR EATING LEAD-CONTAINING DUST OR DEBRIS CAN CAUSE HEALTH PROBLEMS, ESPECIALLY FOR CHILDREN AND PREGNANT WOMEN.

Special properties
P5900 is a high quality shop coat primer for hot and cold rolled steel. It serves as an excellent primer for structural steel. This product has an estimated outdoor durability of from 1 2 to 2 years by itself on clean steel.

Where to use
P5900 is ideal for new and previously painted metal surfaces. It is especially well suited for large jobs in which structural steel is being erected and/or refurbished. May be top coated with alkyd, acrylic or oil-based paints. Do not topcoat with lacquers, vinyl or epoxy paints.

Surface preparation
Surface must be clean and free for grease, rust, and scaling paint. Remove all loose rust, corrosion, and paint by scraping, wire brushing and/or sanding. For new galvanized metal, allow to weather for six months or remove oil coating with paint thinner and wash with vinegar. Rinse well before applying P5900.

Application
Apply only when the air temperature and that of the surface to be painted are above 45 degrees F. Avoid painting late in the day when dew or condensation are likely to form or when rain is threatening. Stir thoroughly before using.

Package sizes
5's and gallons
Drums by special order

Primers
Exterior Paints
Interior Paints
Wood Finishes
Specialty Coatings

Back to Products page