Specialty Coatings
No. 32 Aluminum Paint

Type
Oil-hydrocarbon

Coverage
Approximately 450-500 sq.ft./gallon, depending on the condition of the surface

Application
This product may be applied by brush, roller or spray

Reduction
Brush - None
Roller- None
Spray -With V-18 Paint & Enamel Thinner, if needed

Dry time
Tack free - 12 hours
Recoat - 36 hours

Cleanup
Use Mineral Spirits

Warning!
Removing existing paint from surfaces by means of sanding, scraping, or other mechanical means may create dust or particles containing lead. Avoid creating dust or other debris. BREATHING OR EATING LEAD-CONTAINING DUST OR DEBRIS CAN CAUSE HEALTH PROBLEMS, ESPECIALLY FOR CHILDREN AND PREGNANT WOMEN.

Special properties
Our most durable aluminum paint for interior or exterior work where a tough, weather-resistant aluminum coating is desired.

Where to use
No. 32 Aluminum is recommended for wood and metal surfaces, interior and exterior applications. It is especially well suited for use on roofs, downspouts, gutters, etc.

Surface preparation
Surfaces to be painted must be clean, smooth and free of dirt, dust, mildew, grease, flaking and chipping paint, and other surface contamination. On previously painted surfaces, one coat of No. 32 if the surface is in good condition. Rusty metal should be spot primed with No.1002 Gray Metalguard Primer or No.900 Red Zinc Chromate Primer. On new wood or masonry surfaces, apply two coats of No. 32, allowing 24 to 48 hours drying time between coats, depending on the weather and other conditions which affect drying.

Application
Apply only when the air temperature and that of the surface to be painted are above 45 degrees F. For best results, do not apply in direct sunlight. Avoid painting late in the day when dew or condensation are likely to form or when rain is threatening. Stir thoroughly before using.

Colors available
No. 32 Aluminum

Package sizes
Gallons and quarts

Primers
Exterior Paints
Interior Paints
Wood Finishes
Specialty Coatings

Back to Products page