Specialty Coatings
Traffic Marking Paints

Type
Soya-alkyd

Coverage
300-400 lineal feet [4" stripe] per gallon on concrete @ 15 mils

Application
This product may be applied by brush, roller or spray

Reduction
Brush and Roller - None
Spray - As little as possible with VM & P Naphtha

Dry time
At 77 degrees outside temperature 45 to 60 minutes for traffic

Cleanup
Use VM & P Naphtha

Warning!
Removing existing paint from surfaces by means of sanding, scraping, or other mechanical means may create dust or particles containing lead. Avoid creating dust or other debris. BREATHING OR EATING LEAD-CONTAINING DUST OR DEBRIS CAN CAUSE HEALTH PROBLEMS, ESPECIALLY FOR CHILDREN AND PREGNANT WOMEN.

Special properties
A fast drying formulation resistant to traffic wear, weather, asphalt stains oil and grease. Glass beads may be sprinkled in the paint immediately after application if a reflectorized line is desired.

Where to use
For marking parking stalls, cross walks, restricted areas, etc. on concrete and black top parking lots.

Surface preparation
Surfaces to be painted should be as clean, smooth and free of dirt, dust, mildew, grease, flaking and chipping paint, and other surface contamination as possible.

Application
Apply only when the air temperature and that of the surface to be painted are above 45 degrees F. Avoid painting late in the day when dew or condensation are likely to form or when rain is threatening. Stir thoroughly before using.

Colors available
No. 1021 Yellow
No. 1025 White

Package sizes
Gallons only

Primers
Exterior Paints
Interior Paints
Wood Finishes
Specialty Coatings

Back to Products page