Specialty Coatings
Vanalac Spraying Lacquers

Type
Nitrocellulose

Coverage
Approximately 350 sq.ft./gallon, depending on the condition of the surface

Application
This product is designed to be applied by spray

Reduction
Spray - 8 to 1 with T-305 or L-5 Lacquer Thinners

Dry time
Handle - 10 minutes
Recoat - 1 hour

Cleanup
Use L-5 Lacquer Thinner

Warning!
Removing existing paint from surfaces by means of sanding, scraping, or other mechanical means may create dust or particles containing lead. Avoid creating dust or other debris. BREATHING OR EATING LEAD-CONTAINING DUST OR DEBRIS CAN CAUSE HEALTH PROBLEMS, ESPECIALLY FOR CHILDREN AND PREGNANT WOMEN.

Special properties
Vanalac Spraying Lacquers are designed to fill a general need where a quick drying finish is required. These products also have good resistance to abrasion and moisture.

Where to use
Vanalac Spraying Lacquers may be used on interior surfaces of wood and metal including such things as cabinets, appliances, furniture, etc.

Surface preparation
Surfaces to be painted must be clean, smooth and free of dirt, dust, rust, mildew, grease, flaking and chipping paint, and other surface contamination. Cracks, seams, holes and nail holes should be filled with caulking compound and allowed to dry.

Application
Apply only when the air temperature and that of the surface to be painted are above 45 degrees F. Stir thoroughly before using.

Colors available
N99-R White
N157-R Black

Package sizes
Gallons only

Primers
Exterior Paints
Interior Paints
Wood Finishes
Specialty Coatings

Back to Products page